Edge Repairing C-Clamp Repair Vulcanizing Press for Rubber Conveyor Belt

• Certification: CE
• Condition: New
• Customized: Customized
• Automatic Grade: Automatic
• Structure: Horizontal
• Material: Aluminum Alloy
• Model NO.: YXL-250x250
• Advantage: Easy to Operate
• Application: Joint Conveyor Belt
• Pressure: 0-1.8MPa
• Heating Method: Electric
• Transport Package: Wooden Box
• Specification: Customized
• Trademark: THEMAX
• Origin: China
• HS Code: 84778000
• Production Capacity: 300/Month

Product Description

edge repairing C-clamp Repair Vulcanizing press for rubber conveyor belt

THEMAX  has many years of experience in Rubber and PVC PU conveyor belts which is necessary to set up a good workshop. All equipment is tested and developed to guarantee a lifetime for many years.

Product Details

Brand: THEMAX

Model : YXL-250*250

Item: THEMAX Spot repair vulcanizer

Power :1.1KW~1.9KW
Pressure :≤2.0Mpa
Voltage:Single phase 220v or 380v

Features of a Spot Repair Vulcanizer

1.Portable due to the low weight with two components 

2.Spot repairs on rubber conveyor belts

3. Smaller controller, also with temperature & time automatic controler

4.Easier operation with aluminum alloy body

 

 When order or inquiry,  please note special requirements:

Model	Temperature(ºC)	Power(kw)	Dimensions(L*W*H mm)	Weight(kg)	pressure(Mpa)
YXL-200x200	145	1.1	1300*200*780	145	≤2.0Mpa
YXL-250x250		1.4	1300*250*780	149
YXL-300x300		1.6	1300*300*780	152
YXL-350x350		1.9	1300*350*780	163

Application method

1. Transfer machine to the repair site.

2. Fill glue in the damaged areas that need to be repaired (see the adhesive part in the vulcanization process of the belt joints, or the demonstration by our staff when the equipment is being tested).

3. Place the frame under the belt and align it with the damaged area.

4. Place the down heating plate just below the damaged area of the belt and then place the upper frame.

5. Press the hydraulic lever until it reaches enough pressure level.

6. Get the first power wire well connected to the electrical control box. Connect the second wire with the electric control box and the upper and down plates.

Note that it corresponds to the sign on the electric control box.

7. Turn on the electric control box and start the vulcanizing repair process.