Conveyor Rubber Belt Spot Repair Press C-Clamp Hot Vulcanizer

• After-sales Service: Online Support
• Warranty: Online Support
• Certification: CE, ISO
• Condition: New
• Customized: Customized
• Automatic Grade: Automatic
• Model NO.: YXL-250*250
• Structure: Horizontal
• Temperature: 145 Degree
• Power: 1.4 Kw
• Weight: 145 Kgs
• Pressure: 2.0 MPa
• Belt Width: 600 ~ 2200 mm
• Beam Type: C-Clamp
• Beam Material: Aluminum Alloy
• Hot Plate Size: 250*250 mm
• Repair Area: 200*200 mm
• Model: Yxl-250*250
• Package: Wooden Box
• Voltage: 220 V to 660 V
• Core Component 1: Hot Plate
• Core Component 2: Silicone Blanket Heating Element
• Core Component 3: Auto Electric Control Box
• Transport Package: Wooden Box
• Specification: 1300 * 250 * 780 MM
• Trademark: THEMAX
• Origin: China
• HS Code: 84778000
• Production Capacity: 3000 Sets Per Year

Product Description

 

Model	Temperature	Power	Dimensions	Weight	Pressure
YXL-200*200	145 Degree	1.1 kw	1300*200*780 mm	145 kgs	≤ 2.0 Mpa
YXL-250*250	145 Degree	1.4 kw	1300*250*780 mm	149 kgs	≤ 2.0 Mpa
YXL-300*300	145 Degree	1.6 kw	1300*300*780 mm	152 kgs	≤ 2.0 Mpa
YXL-350*350	145 Degree	1.9 kw	1300*350*780 mm	1163 kgs	≤ 2.0 Mpa

Conveyor belt vulcanizing press is the widest used conveyor belting equipment, its only need a few steps to confirm press model.

The proper model selection for a sectional vulcanizier depends on determining dimensions A and B(see diagram above)

A-  the platen length(A) is calculated by adding to the belt manufacturer's recommended splice length.

 6 inches(150mm) for fabrics belt

14 inches(355mm) for steelcord belt

B- the platen width(B) which includes the bias angle, it determined by adding to the belt width

6 inches(150mm) for fabric belt

8 inched(200mm) for steelcord belt

To this figure multiply by:

1.07 for 22 degree bias angle

1.05 for 17 degree bias angle

Dimensions A and B represent the outside platen dimensions. Scan down the list below until  you arrive at a platen size the corresponds with your figures.

If the size you require is not listed below our Sales department will be happy to recommend a suitable size, rectangular configurations and multiple platen arrangements are also available upon request.
 

Specifications are subject to change without notice.

Build-in cooling device on all vulcanizer.

Total weights include electrical control panel, cable sets are set-up templates for all models.

All models include electronic fluid pressure pump

Temperature adjustable between 0-199 Degree.C

Sectional vulcanizers are build on a 18 degree bias

Custom sizes, rectangular configurations and multiple  platen arrangements available on request.