Customization: | Available |
---|---|
After-sales Service: | Supply |
Warranty: | 1 Years |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
The proper model selection for a SECTIONAL vulcanizer depends on determining dimensions A and B(see diagram at right). vulcanizador,conveyor belt splicing procedure#hot splice conveyor belt
A-the platen length (A)is calculated by adding to the the belt manufacturer's recommended splice length
6 inches (150 mm) for fabric belt
8 inches (205 mm) for finger splice
14 inches (355 mm) for steelcord belt
B-the platen width (B) which includes the bias angle,is determined by adding to the belt width
6 inches (150 mm) for fabric belt
8 inches (200 mm) for steelcord belt
To this figure multiply by:
1.07 for 22 degree bias angle
1.05 for 17 degree bias angle#vulcanizing press
Dimensions A and B represent the outside platen dimensions. Scan down the list below until you arrive at a platen size that corresponds with your calculations.
If the size you require is not listed below our Sales department will be happy to recommend a suitable size. Custom sizes, rectangular configurations and multiple platen arrangements are also available upon request.
The following is only a small sampling of Sectional vulcanizing presses available from EPNUO.
Custom sizes, rectangular configurations, multiple platen arrangements or models for higher operating pressure available on request. Contact us or your local representative for more information.
100 PSI (7 kg/cm sq.) units suitable for splicing fabric ply belting.
Specifications are subject to change without notice.#conveyor belt vulcanizing press for sale
Integral cooling standard on all units.
Total weights include electrical control panel, cable sets and set-up templates for all models.
Temperature adjustable between 200 - 365 deg. F (93 - 185 deg. C). ·
Sectional vulcanizers are built on a 22 degree bias with a left hand lead.
ZLJ conveyor belt vulcanizing machines can be used by one or multiple combinations according to the joint length of the belt.The main configuration of a single vulcanizing machine is as following:
Name
|
Amount
|
The whole machine
|
1 set
|
Ratchet wrench
|
2 piece
|
steel pad
|
1 set
|
Clamping device
|
1 set
|
Electric control box
|
1 set
|
Power cable
|
1 root
|
Control cable
|
2 root
|
Thermal resistance
|
2 pieces
|
QL electric water pump
|
1 set
|
SD Hand pressure pump (Optional)
|
1 set
|
Pressure pipe
|
2 root
|
Water cooling system (Optional)
|
1 set
|
The dimension and shape of the machine can be customized by your requirements. ANTAI STYLE design available |
|||||
Model |
Belt width(mm) |
Total Power(kw) |
Dimensions (L*W*H mm) |
Net Weight (kg) |
Max weight of single Component after separation(kg) |
ZLJ-650*830 |
650 |
9.5 |
1370*830*630 |
430 |
45 |
ZLJ-650*1000 |
10.8 |
1370*1000*630 |
500 |
66 |
|
ZLJ-800*830 |
800 |
11.2 |
1520*830*630 |
535 |
70 |
ZLJ-800*1000 |
13.5 |
1520*1000*630 |
575 |
79 |
|
ZLJ-1000*830 |
1000 |
14.1 |
1720*830*630 |
595 |
82 |
ZLJ-1000*1000 |
15.7 |
1720*1000*630 |
620 |
95 |
|
ZLJ-1600*830 |
1600 |
21.5 |
2320*830*800 |
1270 |
120 |
ZLJ-1600*1000 |
22.3 |
2320*1000*800 |
1460 |
146 |
|
ZLJ-2000*830 |
2000 |
27.2 |
2720*830*950 |
1760 |
154 |
ZLJ-2000*1000 |
30.0 |
2720*1000*950 |
1860 |
182 |
Established in 2000 ,Qingdao Antai Mining Machinery Co.,Ltd. is a branch of Antai Heavy Industries Group.Based on 30 years of experience in design and development in the field of industrial equipment and over 17 years in the field of heavy-duty conveyor belts hot splice, the group has successfully achieved a stable position both domestically and internationally.
Over the years, the company's strict quality control and customer-centric guiding ideology help a lot with the development both domestic and overseas. As one of the largest and sustainable development companies in China , our company's quality standard has been appraised by the Ministry of industry and commerce as the industry standard of conveyor belt vulcanizing industry after a series of rigorous evaluation tests.
We have our own R&D team.In 2010, Antai mining Machinery successfully developed an advanced, with independent intellectual property rights of the vulcanizing machine heating elements and pressure components to reduce product failure rate. By now,our heating and pressure components have been widely used by domestic vulcanizing machine manufacturers, greatly improve the international competitiveness of china made vulcanizing machine
conveyor belt,conveyor belting,belt splicing,belt splices,belt splicer,belt vulcanizer,belt vulcanizing,belt vulcanizing equipment,vulcanizing press,vulcanizing presses,hot vulcanizing machine,vulcanising machine,belt splicing machine,belt splicing press,belt splicing equipment,vulcanization press,belt joining press,belt joining machine,belt joining,belts vulcanizers,conveyor belt repair,used mobile vulcanizing presses,belts hot splicing,belts hot vulcanizing,conveyor belt hot repair
01) Q: Normal delivery time?
A: We have table produce line, hot sale products normally HAVE STOCK. If customized, need about 15 working days